Home > News > hid xenon kit >

HID lens what is called the angel eye headlight assembly

HID lens what is called the angel eye headlight assembly
Issue Time:2014-07-14
HID lens 
 
First, what is called the lens 

In car headlights, the lens cap light is the most standard form, can have a very clear-cut line of light and dark, to solve the problem of astigmatism, in foreign countries, xenon lamp is used as standard lens, this lens optics are a category, we call it "lens." Using a lens-type lamp headlights headlights compared with traditional lamp, brightness uniformity, penetration, light loss is small. 
     Vehicles equipped with a lens cap of two kinds: a single light, double light. Single optical lens design which they were almost light beam corresponding to the lens, such as: optical lens near the M6​​, Mondeo far light lens; outside different bifocal lens is that it can be similarly low beam conversion transformation, usually the last light state, while at the same time open the beam, which mechanism is operated by an electromagnetic gear change optical sheet, so that the light beam is also assigned to the up-beam irradiation, is equal to two light beam together. Bifocal lens is generally used in high-end cars above, such as A6. BMW. Benz. 
 
Second, what is called Angel Eyes 
   
Angel eye is actually a diaphragm, no practical function, mainly from the decorative appearance and wide action show, red, blue, green, yellow, purple range. Angel Eyes is divided into two kinds, (1) cathode tube material: glass, you need to start, the brightness is very high, (2) LED, materials, plastic light guide, similar to BMW angel eyes; generally are using a modified LED structure , so called angel eyes LED aperture; but sometimes it was the angel eye headlight assembly with a simple call to angel Eyes, or angel eye headlights, angel eye headlight assembly, in fact, is to confuse the concept, right angel eyes the concept should refer to angel eye rings. 

   Third, what is called the angel eye headlight assembly 
   
  Headlight assembly angel eye headlight assembly, in fact, with angel eyes LED aperture, some with and some without lens lens, some with a single optical lens (mostly near light lens), some with bifocal lens ; 
 

     HID in China has developed a number of years, from immature to mature technology, independent research from version to copy. After years of development, the technology has essentially reached a more mature stage, but in the automotive xenon lamp various models, H4 (bifocal) The issue has always been not well resolved, many people are looking to engage HID H4 (bifocal) of proven solutions. 
     Those who engage people know HID, H4 Xenon model is one of many models most complaints, most vexing, and even some shops are afraid to install lights installed H4 model. The reason why we propose H4 ultimate solution, because we carefully resolved light type, variable light, positive and negative models GM and other issues, including restrictions on policy and so on, we passed on the structure and design of continuous improvement, to promote cost reduction and improve the production process, to the practical promotion of the market. We see this process as H4 ultimate solution. 
Market participants to answer some questions 
1, Q: Currently, the market xenon lamp H4 what type? 
         A: Currently, there are on the market H4 telescopic, bi-xenon tube, magnetic spring-type, single xenon single factor, single xenon high beam, low beam xenon single, shading type. 
 
2, Q: What are the limitations H4 exist? How to solve? 
         A: (1) astigmatism (2) spot inaccurate (3) variable optical obstruction (4) positive and negative models can not be universal, the most prominent problem is the light-and variable optical problems. 
    
  Also, not to be overlooked is the xenon lamp installed in the car, 90% of owners have such a feeling in the car look very compelling, but in the cab to see more blurred. This is completely contrary to automobile lighting design, so many places is prohibited to install a xenon lamp. When installing xenon lamp, and only put on the headlight lens, it will not affect others and themselves, "bright future" and in accordance with international standard light type, so the factory equipped with a xenon lamp lens models are safe there. So in light type developed to solve the problem, we first consider the installation of a convex lens, only the installation of a convex lens to solve the problem of light pattern. 
     Variable optical problems. H4 xenon lamp models mainly aim point by xenon lights telescopic movement to solve the distance light, xenon lamp through more than 20,000 volt high-voltage start. H4 telescopic stage ignition phenomenon occurs, the spot inaccurate, telescopic stuck and so on. The reason is that a magnetic motor with integrated lamp design defects caused by various conflicts and therefore the temperature of the motor magnetic tube, the temperature and time of the insulating material so produced, thereby leading to the above phenomenon. The new visor improvement programs belong to the principle of the lamp and shading film completely separated, and built a large space, thus completely solve the spot light and variable positioning problem. 
     Because bifocal lens are independent of each gobo motor control, completely separated from the lamp and the light shielding plate, variable optical unit can direct connections original car lines, can further improve the reliability of the light becomes, and also solve the positive and negative power models dimmer problem. 
 
3, Q: install complex? How the market outlook? 
        A: Installation bifocal lens, high technical content requirements, the need for technical personnel to install the high technology well, thus restricting its promotion. Our research and development through the efforts of all personnel in the design, production and improved technology, thus making the production and installation of standardization and simplification, thus greatly reducing the cost. Thus making it possible marketing. 
     Market outlook mainly to see the prices and costs, the market share has been met, technology has matured, the end customer prices have been basically flat or close to, the key is to look at ways to promote it. 
  
4, Q: Can I push a high place? 
       A: You can install angel eyes, backlight, a variety of LED, etc., to make it more eye-catching bright, highlighting the modification of the human personality and aesthetic requirements. 
 
5, Q: Where is your company's strengths? 
       A: We do standardization, simplification, covering all H4 in production models on the market, because we have our own R & D, but also to meet individual customer requirements (including the installation of LED, angel eyes, etc.) As the market the problem appears similar products, such as: into the water, shake off the lights, light angle shift of focus issues, our products do not exist. 
 
Lens action 
 
First, the standard bifocal lens can automatically adjust the distance light and up to European standards and American standards, the light emitted through the lens, the light shaped balance, uniform light distribution. Open beam, the opposite is not blinding drivers; when the beam focus according to the more distant and clear. 
 
Second, the condenser, bifocal lens is accompanied by, people use HID xenon lamp is used to light to make the light brighter. Xenon lamp color temperature is too high, but tend to be too harsh, so that the driver can not see the other side of the road conditions. Through the lens of the light is still bright, but soft light. 
 
Third, focus, xenon lamp emits light in the rain and fog will refract each other, the light is scattered. With a bifocal lens, the light is focused, the driver can feel at ease driving. 
 
Fourth, beautiful, with a bifocal lens can be fitted with angel eyes 
 
Five trends summary, xenon lamp defects by bifocal lens to complement each other. States to consider reducing traffic accidents, the bill will be introduced, modified xenon lamp must be fitted with car bifocal lens can be examined only.
HID lens 
 
First, what is called the lens 

In car headlights, the lens cap light is the most standard form, can have a very clear-cut line of light and dark, to solve the problem of astigmatism, in foreign countries, xenon lamp is used as standard lens, this lens optics are a category, we call it "lens." Using a lens-type lamp headlights headlights compared with traditional lamp, brightness uniformity, penetration, light loss is small. 
     Vehicles equipped with a lens cap of two kinds: a single light, double light. Single optical lens design which they were almost light beam corresponding to the lens, such as: optical lens near the M6​​, Mondeo far light lens; outside different bifocal lens is that it can be similarly low beam conversion transformation, usually the last light state, while at the same time open the beam, which mechanism is operated by an electromagnetic gear change optical sheet, so that the light beam is also assigned to the up-beam irradiation, is equal to two light beam together. Bifocal lens is generally used in high-end cars above, such as A6. BMW. Benz. 
 
Second, what is called Angel Eyes 
   
Angel eye is actually a diaphragm, no practical function, mainly from the decorative appearance and wide action show, red, blue, green, yellow, purple range. Angel Eyes is divided into two kinds, (1) cathode tube material: glass, you need to start, the brightness is very high, (2) LED, materials, plastic light guide, similar to BMW angel eyes; generally are using a modified LED structure , so called angel eyes LED aperture; but sometimes it was the angel eye headlight assembly with a simple call to angel Eyes, or angel eye headlights, angel eye headlight assembly, in fact, is to confuse the concept, right angel eyes the concept should refer to angel eye rings. 

   Third, what is called the angel eye headlight assembly 
   
  Headlight assembly angel eye headlight assembly, in fact, with angel eyes LED aperture, some with and some without lens lens, some with a single optical lens (mostly near light lens), some with bifocal lens ; 
 

     HID in China has developed a number of years, from immature to mature technology, independent research from version to copy. After years of development, the technology has essentially reached a more mature stage, but in the automotive xenon lamp various models, H4 (bifocal) The issue has always been not well resolved, many people are looking to engage HID H4 (bifocal) of proven solutions. 
     Those who engage people know HID, H4 Xenon model is one of many models most complaints, most vexing, and even some shops are afraid to install lights installed H4 model. The reason why we propose H4 ultimate solution, because we carefully resolved light type, variable light, positive and negative models GM and other issues, including restrictions on policy and so on, we passed on the structure and design of continuous improvement, to promote cost reduction and improve the production process, to the practical promotion of the market. We see this process as H4 ultimate solution. 
Market participants to answer some questions 
1, Q: Currently, the market xenon lamp H4 what type? 
         A: Currently, there are on the market H4 telescopic, bi-xenon tube, magnetic spring-type, single xenon single factor, single xenon high beam, low beam xenon single, shading type. 
 
2, Q: What are the limitations H4 exist? How to solve? 
         A: (1) astigmatism (2) spot inaccurate (3) variable optical obstruction (4) positive and negative models can not be universal, the most prominent problem is the light-and variable optical problems. 
    
  Also, not to be overlooked is the xenon lamp installed in the car, 90% of owners have such a feeling in the car look very compelling, but in the cab to see more blurred. This is completely contrary to automobile lighting design, so many places is prohibited to install a xenon lamp. When installing xenon lamp, and only put on the headlight lens, it will not affect others and themselves, "bright future" and in accordance with international standard light type, so the factory equipped with a xenon lamp lens models are safe there. So in light type developed to solve the problem, we first consider the installation of a convex lens, only the installation of a convex lens to solve the problem of light pattern. 
     Variable optical problems. H4 xenon lamp models mainly aim point by xenon lights telescopic movement to solve the distance light, xenon lamp through more than 20,000 volt high-voltage start. H4 telescopic stage ignition phenomenon occurs, the spot inaccurate, telescopic stuck and so on. The reason is that a magnetic motor with integrated lamp design defects caused by various conflicts and therefore the temperature of the motor magnetic tube, the temperature and time of the insulating material so produced, thereby leading to the above phenomenon. The new visor improvement programs belong to the principle of the lamp and shading film completely separated, and built a large space, thus completely solve the spot light and variable positioning problem. 
     Because bifocal lens are independent of each gobo motor control, completely separated from the lamp and the light shielding plate, variable optical unit can direct connections original car lines, can further improve the reliability of the light becomes, and also solve the positive and negative power models dimmer problem. 
 
3, Q: install complex? How the market outlook? 
        A: Installation bifocal lens, high technical content requirements, the need for technical personnel to install the high technology well, thus restricting its promotion. Our research and development through the efforts of all personnel in the design, production and improved technology, thus making the production and installation of standardization and simplification, thus greatly reducing the cost. Thus making it possible marketing. 
     Market outlook mainly to see the prices and costs, the market share has been met, technology has matured, the end customer prices have been basically flat or close to, the key is to look at ways to promote it. 
  
4, Q: Can I push a high place? 
       A: You can install angel eyes, backlight, a variety of LED, etc., to make it more eye-catching bright, highlighting the modification of the human personality and aesthetic requirements. 
 
5, Q: Where is your company's strengths? 
       A: We do standardization, simplification, covering all H4 in production models on the market, because we have our own R & D, but also to meet individual customer requirements (including the installation of LED, angel eyes, etc.) As the market the problem appears similar products, such as: into the water, shake off the lights, light angle shift of focus issues, our products do not exist. 
 
Lens action 
 
First, the standard bifocal lens can automatically adjust the distance light and up to European standards and American standards, the light emitted through the lens, the light shaped balance, uniform light distribution. Open beam, the opposite is not blinding drivers; when the beam focus according to the more distant and clear. 
 
Second, the condenser, bifocal lens is accompanied by, people use HID xenon lamp is used to light to make the light brighter. Xenon lamp color temperature is too high, but tend to be too harsh, so that the driver can not see the other side of the road conditions. Through the lens of the light is still bright, but soft light. 
 
Third, focus, xenon lamp emits light in the rain and fog will refract each other, the light is scattered. With a bifocal lens, the light is focused, the driver can feel at ease driving. 
 
Fourth, beautiful, with a bifocal lens can be fitted with angel eyes 
 
Five trends summary, xenon lamp defects by bifocal lens to complement each other. States to consider reducing traffic accidents, the bill will be introduced, modified xenon lamp must be fitted with car bifocal lens can be examined only.

Guangzhou Liwin Electronic Technology Co., Ltd