- new products from liwinchina group
- led work light
- led headlight
- Auto led laser fog lamp
- hid xenon kit
- Exhibitions informations
- DRL led daytime running light
- How to Change an Auto Light Bulb
- Liwin China New promotion
- car led
- led welcome light
- led light bar
- led car logo
- car music rhythm light
- led car wheel lights
- LED Bike spoke light
The Precautions for install the HID xenon lamp :
1 , Do not ballast mounted beside the heating element can generally be installed above the bumper to help dissipate heat.
2, do not install the ballast beside some wires , do not install closer to a place away from the water ; such as water tanks
Nearby. ( Excessive moisture can cause leakage and aging ballast )
3 , placed in a better position permeability to allow air flow to reduce the temperature of the ballast . Installation, a
Like on the relay line group , fuses exposed, easy to replace.
4, the high-voltage part of the ballast winding is not easy to avoid too large a magnetic field , and the impact of other electric cars
Devices. Wiring to the ballast down installation.
5, after the bulb is installed to ensure sealing.
6 , when installing a dedicated line group may bear traces general appearance, not connected to the heating element , so as to avoid high temperature
Cause electrical short circuit breaker . Use cable ties tied , do not touch the mechanical moving parts , resulting in unnecessary exposure .
7 , each interface , fuses, electrical tape strapping good use , in order to avoid loosening cause poor contact.
8 , when the lamp is installed, one side will not light , or flashes , the negative adjustment is generally the first group of dedicated lines
9, the installation of lights H4 model , if the light does not shine , not light , and will continue to flash , check H4
There is no connection of the positive and negative match , generally two types + + - and - + , a good match will return to normal .
10 , sometimes encounter is a positive frame of the car , the Jedi plastic bag To ballast , the ballast will work .
11 , after installation, without installing a dedicated line , in order to avoid excessive current when starting the car fuses on the original
Broken , replace the fuse to the original vehicle control more than 20 Abe .
Web: www.liwin-china.com， www.lw.en.alibaba.com, www.liwin.en.alibaba.com